OMB-DAC488 $1295
IEEE-488 Digital-to-Analog Converter with Digital IO

• Two or Four 12-Bit Plus Sign Isolated D/A Converters

• Programmable Ranges ▒1, 5, or 10 V Full Scale

• Built-In 8192-Point Waveform Buffer with 1 kHz Update Rate

• 500 V Isolation from IEEE Common and From Other Analog Channels

• 8-Bit Digital Input Port and 8-Bit Digital Output Port

The OMEGA OMB-DAC488 IEEE-to-12 bit plus sign analog output converter features either two or four analog output channels that are isolated from IEEE common and from other analog voltage channels by up to 500 V. Each channel can be programmed for full-scale output of ▒1, 5 or 10 V. The user can program each channel for output in increments of 1 part in 4096 plus sign. Outputs may be specified in either volts or bits from the IEEE bus. A quick disconnect terminal block provides convenient signal connection.

An 8192 sample waveform buffer allows the user to store waveforms for each channel with a maximum update rate of 1 kHz per sample. Each waveform can be output in sequence based on a periodic interval, external trigger or software command. Each port can be triggered independently via any of the trigger conditions.

Eight bits of digital input and eight bits of digital output are also provided. These are TTL-level non-isolated lines that can be programmed from the IEEE bus.

View an Adobe Acrobat pdf file for more product info (requires Acrobat Reader).